Functions of the chief engineer of construction control. Lead Construction Supervision Engineer job description

This job description has been translated automatically. Please note that automatic translation does not provide 100% accuracy, so there may be minor translation errors in the text.

Preface to job description

0.1. The document comes into force from the moment of its approval.

0.2. Document developer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.3. Document approved: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.4. Periodic check this document produced at intervals not exceeding 3 years.

1. General Provisions

1.1. The position "Lead Engineer for Construction Supervision" belongs to the category "Professionals".

1.2. Qualification requirements - complete higher education in the relevant area of ​​training (master, specialist) and advanced training. At least 2 years of work experience in the profession of a construction supervision engineer of category I.

1.3. Knows and applies:
- resolutions, orders, orders, methodological, regulatory and other guidance materials for the implementation of construction and installation work;
- prospects technical development construction organization;
- technical conditions and schedules for the implementation of construction and installation works, standards for Construction Materials, details, designs;
- building regulations;
- basics of production technology and means of performing construction and installation works;
- the procedure for acceptance of objects, the construction of which is completed;
- methods of their quality control;
- the procedure for issuing design estimates and other technical documentation;
- advanced domestic and overseas experience construction and installation works, new building materials, products, structures;
- fundamentals of economics, organization of production and management, labor legislation, environmental protection;
- rules and norms of labor protection, industrial sanitation and fire protection.

1.4. The lead engineer for construction supervision is appointed to the position and dismissed by order of the organization (enterprise/institution).

1.5. The Lead Construction Supervision Engineer reports directly to _ _ _ _ _ _ _ _ _ _ .

1.6. The Lead Construction Supervision Engineer directs the work _ _ _ _ _ _ _ _ _ _ .

1.7. Lead Engineer for Construction Supervision during absence, replaced by a person appointed in in due course which acquires the relevant rights and is responsible for the proper performance of the duties assigned to it.

2. Description of work, tasks and job responsibilities

2.1. Carries out technical supervision of construction and installation works.

2.2. Controls the compliance of the volumes, terms and quality of construction and installation works, as well as the quality of materials, products used in construction, with the approved design and budget documentation, building codes and rules, standards, specifications, labor protection standards, fire safety requirements.

2.3. Takes part in resolving issues of introducing changes to projects related to the introduction of progressive technological processes, planning and constructive solutions, in discussion and agreement design decisions arising during construction.

2.4. Promptly resolves issues related to the replacement of materials, products, structures (without reducing the quality construction works).

2.5. It studies the reasons leading to violations of the terms of construction and the deterioration of its quality, takes measures to prevent this violation.

2.6. Carries out technical acceptance of completed construction and installation works and objects, draws up the necessary technical documentation for the presentation of the object to the selection committee; takes part in the work of the selection committee.

2.7. Controls the elimination of defects and defects construction organizations within the time limits set by the selection committee; prepares the necessary data for the preparation of reports on the performance of capital construction works.

2.8. Knows, understands and applies the current regulatory documents relating to its activities.

2.9. Knows and fulfills the requirements of regulatory acts on labor and environmental protection, complies with the norms, methods and techniques for the safe performance of work.

3. Rights

3.1. The Lead Construction Supervision Engineer has the authority to take action to prevent and correct any irregularities or nonconformities.

3.2. The lead engineer for construction supervision is entitled to receive all provided by law social guarantees.

3.3. The lead engineer for construction supervision has the right to demand assistance in the performance of his duties and the exercise of rights.

3.4. The lead engineer for construction supervision has the right to demand the creation of organizational and technical conditions necessary for the performance of official duties and the provision of the necessary equipment and inventory.

3.5. The lead engineer for construction supervision has the right to get acquainted with the draft documents relating to his activities.

3.6. The lead engineer for construction supervision has the right to request and receive documents, materials and information necessary for the performance of his duties and instructions of the management.

3.7. The leading engineer for construction supervision has the right to improve his professional qualifications.

3.8. The lead engineer for construction supervision has the right to report all violations and inconsistencies identified in the course of his activities and make proposals for their elimination.

3.9. The lead engineer for construction supervision has the right to get acquainted with the documents that define the rights and obligations of the position held, the criteria for assessing the quality of performance of official duties.

4. Responsibility

4.1. The lead engineer for construction supervision is responsible for non-fulfillment or untimely fulfillment of the requirements of this job description obligations and (or) non-use of the granted rights.

4.2. The lead engineer for construction supervision is responsible for non-compliance with the rules of internal labor regulations, labor protection, safety, industrial sanitation and fire protection.

4.3. The lead engineer for construction supervision is responsible for disclosing information about the organization (enterprise/institution) that is a trade secret.

4.4. The lead engineer for construction supervision is responsible for non-fulfillment or improper fulfillment of the requirements of internal normative documents organizations (enterprises/institutions) and legal orders of management.

4.5. The lead engineer for construction supervision is responsible for offenses committed in the course of his activities, within the limits established by the current administrative, criminal and civil legislation.

4.6. The lead engineer for construction supervision is responsible for causing material damage to the organization (enterprise/institution) within the limits established by the current administrative, criminal and civil legislation.

4.7. The lead engineer for construction supervision is responsible for the misuse of the granted official powers, as well as their use for personal purposes.

I. General provisions

1. The construction supervision engineer belongs to the professional category.

2. For the position:

A construction supervision engineer is appointed a person who has a higher professional (technical) education without presenting requirements for work experience or secondary vocational education and work experience in the position of a technician of category I or other engineering and technical positions replaced by specialists with secondary vocational education, not less than 5 years;

Category II construction supervision engineer - a person with a higher professional (technical) education and work experience as a construction supervision engineer or other engineering and technical positions filled by specialists with higher professional education for at least 3 years;

Category I construction supervision engineer - a person with a higher professional (technical) education and work experience as a category II construction supervision engineer for at least 3 years.

3. Appointment to a position and dismissal from it is carried out by order

4. The construction supervision engineer must know:

4.1. Decrees, orders, orders, methodological, regulatory and other guidance materials for the implementation of construction and installation works.

4.2. Prospects for the technical development of the organization.

4.3. Technical conditions and schedules for the implementation of construction and installation works.

4.4. Standards, specifications for building materials, parts, structures.

4.5. Building regulations.

4.6. Fundamentals of production technology and methods of conducting construction and installation works.

4.7. The procedure for acceptance of objects completed by construction, and methods for controlling their quality.

4.8. The procedure for issuing design estimates and other technical documentation.

4.9. Advanced domestic and foreign experience in construction and installation works, new building materials, products, structures.

4.10. Fundamentals of economics, labor organization, organization of production and management.

4.11. Fundamentals of legislation on environmental protection.

4.12. Fundamentals of labor legislation.

4.13. Rules and norms of labor protection, safety measures, industrial sanitation and fire protection.

6. During the absence of a construction supervision engineer (illness, vacation, business trip, etc.), his duties are performed by a person appointed in the prescribed manner. This person acquires the appropriate rights and is responsible for the proper performance of the duties assigned to him.

II. Job Responsibilities

Construction supervision engineer:

1. Carries out, on behalf of the customer, technical supervision over the performance of construction and installation works and acceptance of completed objects from contracting construction organizations.

2. Controls the progress of the plans capital construction, compliance with the volumes, terms and quality of construction and installation works, as well as the quality of the materials, products, structures used, approved design and estimate documentation, working drawings, building codes and regulations, standards, specifications, labor protection and safety standards, fire safety requirements .

3. Participates in resolving issues of introducing changes to projects in connection with the introduction of more advanced technological processes, space-planning and design solutions that reduce costs and improve technical economic indicators objects of construction and reconstruction.

4. Takes part in the review and approval of changes in design decisions that arise during construction, promptly resolves issues of replacing, if necessary, materials, products, structures (without reducing the quality building objects).

5. Study the causes causing failures in terms and deterioration in the quality of construction and installation works, take measures to prevent and eliminate them.

6. Carries out technical acceptance of completed construction and installation works and objects, draws up the necessary technical documentation.

7. Participates in the work of commissions for the acceptance of construction projects and their commissioning.

8. Controls the quality of elimination of imperfections and defects by construction organizations within the time limits established by the commission.

9. Keeps records of completed construction and installation works and prepares the necessary data for reporting on the implementation of capital construction plans.

III. Rights

The construction supervision engineer has the right to:

1. Get acquainted with the draft decisions of the organization's management regarding its activities.

2. Submit proposals for the management to improve the work related to the provisions of this responsibilities.

3. Within the limits of his competence, report to his immediate supervisor about all the shortcomings identified in the course of his activities and make proposals for their elimination.

4. Request personally or on behalf of the management of the organization from the departments of the organization and other specialists information and documents necessary for the performance of their duties.

5. Involve specialists of all (individual) structural divisions to solve the tasks assigned to him (if it is provided for by the regulations on structural divisions, if not, then with the permission of the head of the organization).

6. Require the management of the organization to assist in the performance of their duties and rights.

IV. A responsibility

The Construction Supervision Engineer is responsible for:

1. For improper performance or non-performance of their official duties provided for by this job description - to the extent determined by the current labor legislation Russian Federation.

2. For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of the Russian Federation.

3. For causing material damage - within the limits determined by the current labor and civil legislation of the Russian Federation.

A construction supervision engineer is a person who oversees the implementation of all construction and installation work. This employee is one of the leading specialists, reports only to the chief construction engineer.

The duties of an engineer include supervision of workers, monitoring compliance with the rules for the implementation of construction work. Of course, each enterprise has its own specifics, therefore the activities of a supervisory engineer may differ depending on the characteristics of the company and its working facilities.

However, the main responsibilities of this position are:

• acceptance of finished objects;
• control over the progress of work according to the plan;
• tracking the timing of construction and installation works;
• quality control of the tools and materials used;
• maintaining control documentation, drawings;
• supervision of compliance by employees-subordinates with the norms and rules for the performance of work, awareness of safety requirements;
• participation in meetings and resolution of issues related to changes in plans, deadlines, introduction of new technologies;
• participation in negotiations and events that are aimed at directly reducing the cost of construction, making decisions;
• in case of non-compliance with the deadlines for the performance of work, the construction supervision engineer is obliged to take measures to eliminate situations that adversely affect the activities of the organization;
• resolving issues that arose at the time of the start of the construction of the facility and are associated with the need for prompt replacement of materials, tools, in some cases with the dismissal and replacement of subordinate employees;
• the completion of work also does not pass without the control of the engineer. He is obliged to accept the object and draw up documents that confirm the fact that the building is ready for operation;
• the engineer must have a place in the commission for the delivery of objects;
• if errors are found in the work at the time of the decision to hand over the object, the specialist appoints measures to eliminate them and monitors the implementation of the order;
• maintains reports on the conduct of capital construction;
• controls the implementation by employees of the rules on safety and labor protection, the organization of contractor teams;
• produces and organizes security measures;
• supervises the availability and correctness of drawing up permits for work;
• maintains documentation related to the supervision of the loading and unloading of tools, equipment and materials;
• is a member of the commission that oversees labor protection in the company;
• together with other managers, develops job descriptions for the types of work related to construction;
• ensures that instructions are available for all positions related to construction;
• supervises the performance of official duties according to instructions;
• involved in the development of posters and warning symbols related to occupational health and safety;
• instructs employees on safety rules together with other managers;
• supervises the training of arriving employees;
• conducts or facilitates training events;
• controls the timing and rules for the implementation of instructions from supervisory authorities and managers;
• reports to management on the status of work at the facilities, working conditions of employees, depending on the goals and types of work, draws up reports for management;
• identifies the needs of employees in the field, controls the provision of employees with everything necessary;
• collects builders' reports on medical examinations;
• reports on accidents at the facilities, investigates them;
• controls the performance of diagnostic work related to the serviceability of equipment, inspects objects for violations that may cause an emergency.

Qualification of construction supervision engineers

There are 4 levels of qualification for construction supervision specialists. The supervisory engineer must have a complete higher education in the relevant educational institution. In most cases, such employees are recruited with or without experience.
An engineer of the second category is also required to have a diploma of complete higher education, which corresponds to the direction of training, as well as advanced training. There are no requirements for work experience.
The specialist of the first category is a more qualified specialist. It is distinguished from those listed earlier by the mandatory presence of work experience of at least two years.
Some construction companies have a lead supervising engineer on staff. In addition to higher specialized education, the applicant for the position must have at least two years of experience as an engineer of the first category.

Required employee knowledge

The engineer must have knowledge in the field of drawing up orders, orders, methodological standards, the current regulatory framework required for construction. In addition, the specialist is aware of maintaining schedules, compliance with the technical conditions of work, and the prospects for the construction market.
Building codes, rules, knowledge in the field of obsolete, new, imported and domestic materials for the activities of subordinates are mandatory knowledge for an engineer. For leading specialists, it is necessary to know the features of the economy in construction, as well as the norms of labor law.

Building control engineer's page

Since January 1, 2010, self-regulation procedures in the field of engineering surveys, design, construction, reconstruction, overhaul capital construction projects.

According to article 53 of the Town Planning Code of the Russian Federation dated December 29, 2004 No. 190-FZ (hereinafter referred to as the Town Planning Code of the Russian Federation), members self-regulatory organization in the region in the field of engineering surveys, architectural and construction design, construction, reconstruction, overhaul of capital construction facilities (hereinafter referred to as SROs) carry out construction control on their own. To do this, SROs create construction control services and construction control inspection organizations that have construction control experts in their staff and relevant certificates of admission to work, whose conclusions of compliance should be the basis for putting the facility into operation.

The liability of such services and organizations should be insured. At present, according to the Decree of the Government of the Russian Federation dated February 16, 2008 No. 87 “On the composition of sections of project documentation and requirements for their content”, the section “ Building control". The implementation of this idea will significantly reduce the bureaucracy, reduce pressure on business, reduce construction time, increase the level of construction quality control, remove financial responsibility from the state for poor-quality construction, and simplify the procedure for compensating for damages.

According to Urban Planning Code In the Russian Federation, construction control is one of the mandatory forms of control carried out in the process of construction, reconstruction, overhaul of capital construction projects.

Currently, control in the process of construction, reconstruction, overhaul of capital construction facilities is carried out in the following forms: - in accordance with clause 3.7 of SNiP 12-01-2004 "Organization of construction", the developer (customer) monitors the progress and quality of work performed, compliance with their deadlines , quality and correct use of the materials, products, equipment used, carried out in the form technical supervision; - in accordance with paragraph 3.8 of SNiP 12-01-2004 "Organization of construction" in the construction of hazardous production facilities under an agreement with the developer-customer) the developer of project documentation carries out architectural supervision of compliance with the requirements that ensure the safety of the facility. Author's supervision over the compliance of the work performed with the design documentation in other cases is carried out at the discretion of the developer (customer); - in accordance with section 6 of SNiP 12-01-2004 "Organization of construction", persons engaged in construction (general contractors, contracting construction and construction and installation organizations) perform production quality control of construction. According to the provisions of articles 706 and 749 of part 2 Civil Code Russian Federation of January 26, 1996 the developer (customer), as well as the person carrying out the construction, has the right to involve accredited construction laboratories, specialized organizations performing geodetic work, monitoring the technical7 condition in the performance of their obligations in the field of construction control building structures building under construction, buildings falling into the construction zone, as well as adjacent to construction site territory. The normative basis for the implementation of architectural supervision is SNiP 1.06.05-85 "Regulations on the author's supervision of design organizations for the construction of enterprises, buildings and structures."

Construction control must be carried out continuously at all stages of construction, reconstruction, overhaul of a capital construction object. The construction control system should be formed taking into account the complexity and responsibility of capital construction projects.

Goals, tasks, functions of the customer's construction control engineer

Target. Avoid many construction risks related to the quality of construction products. Ensure the lowest costs associated with the process with high-quality construction and installation works further exploitation object. Ensure long, trouble-free and safe for people operation of the construction site.

A task. Build object according to project documentation and building codes and regulations, to prevent any deviations from design decisions.

To carry out on behalf of the Customer Construction control over the performance of construction and installation works and acceptance of completed objects from contracting construction organizations.

Control the progress of the implementation of capital construction plans, compliance with the volume, timing and quality of construction and installation works, as well as the quality of the materials, products, structures used, approved design and estimate documentation, working drawings, building codes and rules, standards, specifications.

Participate in resolving issues of introducing changes to projects in connection with the introduction of more progressive technological processes, space-planning and design solutions that reduce costs and improve the technical and economic indicators of construction and reconstruction facilities.

Take part in the review and approval of changes in design decisions that arise during construction, promptly resolve issues of replacing materials, products, structures, if necessary (without reducing the quality of construction objects).

To study the reasons causing delays and deterioration in the quality of construction and installation works, to take measures to prevent and eliminate them.

Carry out technical acceptance of completed construction and installation works and objects, draw up the necessary technical documentation.

Participate in the work of commissions for the acceptance of construction projects and their commissioning.

To control the quality of elimination by construction organizations of imperfections, defects within the time limits established by the commission.

Keep records of completed construction and installation works and prepare the necessary data for reporting on the implementation of capital construction plans.

Save the customer's nerves, time and money.

Services for the implementation of the functions of construction control of the customer:

Registration, subscription to GASK upon receipt of "Permit to start construction".

Quality control of work (compliance with the requirements of SNiP, state standards(DBN), work production technologies).

Construction control over the compliance of construction and installation works and the materials, products, structures and equipment used with the approved design solutions.

Acceptance of the work performed with the signing of the relevant acts ( hidden works, testing, intermediate acceptance of critical structures of buildings and structures).

Construction control and Photo fixation: hidden and other works, the current state of the object. Providing results, both in printed and electronic form.

Fixing the deviations from the working drawings, from the construction technology, from the existing SNiP, GOST, identified during the inspection of the work performed, in the work log, as well as determining the timing for eliminating the detected deviations.

Verification of the correspondence between the volumes of actually performed work and those presented for payment.

Control of compliance of the scope of work and terms of work with the terms of the contract and the construction schedule.

Maintaining a cumulative list of work performed.

Construction control of the completeness and correctness of as-built documentation, including the assessment of the reliability of geodetic executive schemes of completed structures with selective control of the accuracy of the position of elements. Preparation of comments and control of their elimination.

Checking that the contractor has quality documents for the materials, products and equipment used by him.

Conducting incoming control of project documentation. Preparation of comments and control of their elimination.

Monitoring the execution of orders of the authorities state supervision and local government.

Participation in meetings on the construction and design of the facility.

Additional services for working with executive documentation:

Provision of paper forms in printed form (acts of hidden work, test reports, acts for additional work, acts of transfer of an object, defective statements, etc.). Individual acts to facilitate the work on registration (the act will already include: the name of the object, the name of the organizations, the full name of the persons signing the act, etc.).

Checking the quality of as-built documentation (completeness and correctness of its maintenance).

Development of requirements for the design, composition, executive documentation.

Drawing up lists of necessary executive documentation for the types of work.

Advice on executive documentation (what to write in the contract, the procedure for submitting executive documentation, how many copies are needed, the basis for preparation, etc.).

Control over the maintenance of as-built documentation during the entire construction period.

Maintaining (receiving from subcontractors, from the General Contractor; checking, completing by sections in the appropriate folders with compiling registers) as-built documentation and preparing a complete set for transfer to the Customer.

Assistance in the restoration of as-built documentation (work logs, acts of hidden work, etc.).

Additionally:

Putting the object into operation.

Job description of a construction control engineer:

1. GENERAL PROVISIONS

1.1. This job description defines the functional duties, rights and responsibilities of a construction control engineer.

1.2. The construction control engineer is appointed to the position and dismissed in accordance with the procedure established by the current labor legislation by order of the director of the enterprise.

1.3. The construction control engineer reports directly to the person, according to the staffing table.

1.4. The building control engineer must know:

1.4.1 - organizational and administrative documents and regulatory materials of higher and other bodies related to the production and economic activities of the site (facility);

1.4.2 - organization and technology of building production;

1.4.3 - design and estimate documentation for facilities under construction;

1.4.4 - building codes and regulations, specifications for the production and acceptance of construction and installation and commissioning;

1.4.5 - forms and methods of production and economic activities at the site (object);

1.4.6 - norms and prices for the work performed;

1.4.7 - legislative and regulatory legal acts on wages;

1.4.8 - the order of economic and financial relationships contractor with customers and subcontractors;

1.4.9 - a system of production and technological equipment and dispatching of a construction organization;

1.4.10 - scientific and technical achievements and experience in organizing construction production;

1.4.11 - basics of economics, organization of production, labor and management;

1.4.12 - labor legislation;

1.4.13 - Internal labor regulations;

1.5. Requirements for the qualification of a construction control engineer: higher professional (technical) education and work experience in construction in engineering positions for at least 5 years or secondary vocational (technical) education and work experience in construction in engineering positions for at least 8 years.

1.6. During the period of temporary absence of a construction control engineer, his duties are assigned to a person, according to the staffing table.

2. FUNCTIONAL RESPONSIBILITIES

2.1. The construction control engineer exercises control over the production and economic activities of the site.

2.2. The construction control engineer controls the implementation of production tasks for the commissioning of facilities in deadlines and the implementation of construction, installation and commissioning works in accordance with all quantitative and qualitative indicators in compliance with the work execution projects. Controls the production of construction and installation works in accordance with project documentation, building codes and regulations, specifications and other regulatory documents.

2.3. Controls compliance with the technological sequence of construction and installation works at the site.

2.4. Controls measures to increase the level of mechanization of work, the introduction of new technology, improve the organization of labor, reduce the cost of construction, installation and commissioning, economical use of materials.

2.5. The building control engineer is working to disseminate advanced techniques and methods of work.

2.6. The construction control engineer controls the receipt of technical documentation for the construction of facilities.

2.7. Construction control engineer controls applications for construction machines, transport, mechanization, materials, structures, parts, tools, inventory and ensures their efficient use

2.8. The construction control engineer controls the accounting of work performed and the execution of technical documentation.

2.9. Participates in the delivery to customers of completed construction projects, individual stages and work packages for commissioned facilities.

2.10. The construction control engineer controls the work of subcontracting (specialized) organizations and participates in the acceptance of the work performed by them.

2.11. The construction control engineer controls the issuance of permits for the right to work in protected areas.

2.12. The construction control engineer controls the production tasks in terms of the volume of construction, installation and commissioning works, and controls their implementation.

2.13. The construction control engineer supervises workers directly at the workplace on safe methods of work.

2.14. The construction control engineer controls the use of technological equipment (scaffolding, scaffolding, protective devices, fastenings of the walls of pits and trenches, struts, conductors and other devices), construction machines, power plants, Vehicle and protective equipment for workers.

2.15. The construction control engineer monitors compliance with the norms for carrying heavy loads, cleanliness and order at workplaces, in aisles and access roads, the correct maintenance and operation of crane tracks, and the provision of workplaces with safety signs.

2.16. Construction control engineer controls the object storage facilities and protection of property.

2.17. Monitors the state of safety and takes measures to eliminate the identified shortcomings, violations of the rules of industrial sanitation, compliance with work instructions on labor protection. Controls the observance of production and labor discipline by employees, makes proposals for the imposition of disciplinary sanctions on violators.

2.18. The construction control engineer provides assistance to innovators and supervises work to improve the skills of workers, and conducts educational work in a team.

3. RIGHTS OF THE BUILDING CONTROL ENGINEER

The building control engineer has the right to:

3.1. To give instructions to subordinate employees and services, tasks on a range of issues included in his functional duties.

3.2. Control the work, execution planned assignments, timely execution of individual orders and tasks of subordinate services.

3.3. Request and receive the necessary materials and documents related to the activities of the construction control engineer, his subordinate services and divisions.

3.4. Engage in relationships with departments of third-party institutions and organizations to resolve operational issues production activities within the competence of the building control engineer.

3.5. Represent the client's interests in third parties on issues related to production activities at the facility.

4. RESPONSIBILITIES OF BUILDING CONTROL

The building control engineer is responsible for:

4.1. The results and efficiency of production activities at the construction or repair facility.

4.2. Failure to enforce their functional duties, as well as the work of subordinate services on issues of production activities.

4.3. Inaccurate information about the status of execution of work plans of subordinate services.

4.4. Failure to comply with orders, orders and instructions from the administration of the enterprise.

4.5. Failure to take measures to curb the identified violations of the quality of work, safety regulations, fire and other regulations.

4.6. Failure to ensure compliance with labor and performance discipline by employees of subordinate services and personnel subordinate to a construction control engineer.

5. WORKING CONDITIONS

5.1. The work schedule of a construction control engineer is determined in accordance with the Internal Labor Regulations established at the enterprise.

5.2. In connection with the production need, a construction control engineer can travel to business trips(including local importance).

5.3. To solve operational issues related to the provision of production activities, a construction control engineer may be allocated a service vehicle.

6. SCOPE AND IMPACT OF DECISIONS

6.1. To ensure his activities, the construction control engineer is given the right to sign organizational and administrative documents on issues that are part of his functional duties.

We bring to your attention a typical example of a job description for a construction supervision engineer, sample 2019/2020. should include the following sections: general position, duties of a construction supervision engineer, rights of a construction supervision engineer, responsibility of a construction supervision engineer.

Construction Supervision Engineer Job Description belongs to the section Industry-wide qualification characteristics of the positions of employees employed at enterprises, institutions and organizations".

The following items should be reflected in the job description of a construction supervision engineer:

Job Responsibilities of a Construction Supervisor

1) Job responsibilities. Carries out on behalf of the customer technical supervision over the implementation of construction and installation works and acceptance of completed objects from contracting construction organizations. Controls the progress of implementation of capital construction plans, compliance with the volumes, terms and quality of construction and installation works, as well as the quality of the materials, products, structures used, approved design and estimate documentation, working drawings, building codes and regulations, standards, specifications, labor protection standards. Participates in resolving issues of introducing changes to projects in connection with the introduction of more progressive technological processes, space-planning and design solutions that ensure cost reduction and improvement of technical and economic indicators of construction and reconstruction facilities. Takes part in the review and approval of changes in design decisions that arise during construction, promptly resolves issues of replacing materials, products, structures, if necessary (without reducing the quality of construction objects). It studies the reasons causing failures in terms and deterioration in the quality of construction and installation works, takes measures to prevent and eliminate them. Carries out technical acceptance of completed construction and installation works and objects, draws up the necessary technical documentation. Participates in the work of commissions for the acceptance of construction projects and their commissioning. Controls the quality of elimination of imperfections and defects by construction organizations within the time limits established by the commission. Keeps records of completed construction and installation works and prepares the necessary data for reporting on the implementation of capital construction plans.

The construction supervision engineer must know

2) The construction supervision engineer, in the performance of his duties, must know: resolutions, orders, orders, methodological and regulatory materials for the implementation of construction and installation works; prospects for the technical development of the enterprise; technical conditions and schedules for the implementation of construction and installation works; standards, specifications for building materials, parts, structures; building regulations; basics of production technology and methods of conducting construction and installation works; the procedure for acceptance of objects completed by construction, and methods for controlling their quality; the procedure for issuing design estimates and other technical documentation; advanced domestic and foreign experience in construction and installation works; new building materials, products, structures; fundamentals of economics, organization of production, labor and management; fundamentals of legislation on environmental protection; fundamentals of labor legislation; labor protection rules and regulations.

Qualification Requirements for a Construction Supervisor

3) Qualification requirements.

Category I construction supervision engineer: higher professional (technical) education and work experience as a category II construction supervision engineer for at least 3 years.

Category II construction supervision engineer: higher professional (technical) education and work experience as a construction supervision engineer or other engineering and technical positions filled by specialists with higher professional education, at least 3 years.

Construction supervision engineer: higher vocational (technical) education without requirements for work experience or secondary vocational education and work experience as a technician of category I or other engineering and technical positions occupied by specialists with secondary vocational education, at least 5 years.

1. General Provisions

1. The construction supervision engineer belongs to the professional category.

2. A person who has a higher professional (technical) education without presenting requirements for work experience or secondary vocational education and work experience in the position of a technician of category I or other engineering and technical positions substituted by specialists with secondary vocational education is accepted as a construction supervision engineer. less than 5 years.

3. Construction supervision engineer is hired and dismissed _______ (director, manager) organizations on presentation _______ (position) .

4. The construction supervision engineer must know:

• resolutions, orders, orders, methodological and regulatory materials for the implementation of construction and installation works;
• prospects for the technical development of the enterprise;
• technical conditions and schedules for the implementation of construction and installation works;
• standards, specifications for building materials, parts, structures;
• building regulations;
• basics of production technology and methods of conducting construction and installation works;
• the procedure for acceptance of objects completed by construction, and methods for controlling their quality;
• the procedure for issuing design estimates and other technical documentation;
• advanced domestic and foreign experience in construction and installation works;
• new building materials, products, structures;
• fundamentals of economics, organization of production, labor and management;
• fundamentals of legislation on environmental protection;
• fundamentals of labor legislation;
• labor protection rules and regulations.

5. In his activities, the construction supervision engineer is guided by:

• the legislation of the Russian Federation,
• Charter (regulations) of the organization,
• orders and orders _______ (CEO, director, leader) organizations,
• this job description,
• The internal labor regulations of the organization.

6. Construction supervision engineer reports directly to: _______ (position).

7. During the absence of a construction supervision engineer (business trip, vacation, illness, etc.), his duties are performed by a person appointed by _______ (position) of the organization in the prescribed manner, who acquires the appropriate rights, duties and is responsible for the performance of the duties assigned to him .

2. Job Responsibilities of the Construction Supervision Engineer

Construction supervision engineer:

1. Carries out, on behalf of the customer, technical supervision over the performance of construction and installation works and acceptance of completed objects from contracting construction organizations.

2. Controls the progress of the implementation of capital construction plans, compliance with the volumes, terms and quality of construction and installation works, as well as the quality of the materials used, products, structures of the approved design and estimate documentation, working drawings, building codes and rules, standards, technical conditions, safety standards labor.

3. Participates in resolving issues of introducing changes to projects in connection with the introduction of more progressive technological processes, space-planning and design solutions that reduce the cost and improve the technical and economic indicators of construction and reconstruction facilities.

4. Takes part in the consideration and approval of changes in design decisions that arise during construction, promptly resolves issues of replacing materials, products, structures, if necessary (without reducing the quality of construction objects).

5. Study the causes causing failures in terms and deterioration in the quality of construction and installation works, take measures to prevent and eliminate them.

6. Carries out technical acceptance of completed construction and installation works and objects, draws up the necessary technical documentation.

7. Participates in the work of commissions for the acceptance of construction projects and their commissioning.

8. Controls the quality of elimination of imperfections and defects by construction organizations within the time limits established by the commission.

9. Keeps records of completed construction and installation works and prepares the necessary data for reporting on the implementation of capital construction plans.

3. Rights of the construction supervising engineer

The construction supervision engineer has the right to:

1. Submit proposals for management consideration:

• to improve the work related to the duties provided for in this instruction,
• on the encouragement of distinguished workers subordinate to him,
• on bringing to material and disciplinary liability employees who violated production and labor discipline.

2. Request from structural divisions and employees of the organization the information necessary for him to perform his duties.

3. Get acquainted with the documents that define his rights and obligations in his position, the criteria for assessing the quality of performance of official duties.

4. Get acquainted with the draft decisions of the organization's management regarding its activities.

5. Require the management of the organization to provide assistance, including the provision of organizational and technical conditions and registration established documents necessary for the performance of official duties.

6. Other rights established by the current labor legislation.

4. Responsibilities of the construction supervision engineer

The construction supervision engineer is responsible for the following:

1. For improper performance or non-performance of their official duties provided for by this job description - within the limits established by the labor legislation of the Russian Federation.

2. For offenses committed in the course of their activities - within the limits established by the current administrative, criminal and civil legislation of the Russian Federation.

3. For causing material damage to the organization - within the limits established by the current labor and civil legislation of the Russian Federation.

Job description of a construction supervision engineer - sample 2019/2020. Duties of a construction supervision engineer, rights of a construction supervision engineer, responsibility of a construction supervision engineer.